|
|
| |
The membrane sticks to the rollers during lamination, what could be the cause?
|
| |
|
| |
It might be the process temperature, which should not exceed 110℃. |
| |
|
| |
|
Back to the top |
| |
|
| |
Why is the bonding strength not good enough after lamination?
|
| |
| |
There are certain types of adhesives giving better performance to membrane |
lamination. Information can be provided upon request. Process temperature |
may need to be adjusted too. |
| |
| |
|
|
Are your membranes resistant to very high temperature? |
| |
They are resistant up to 60℃ during washing. |
|
| |
|
|
|
How light can the membranes be? |
| |
As thin as 12 micron (0.012mm) in thickness. |
|
| |
|
|
|
| |
What are the differences among all the DINTEX membranes listed? |
| |
They are all water resistant up to 10,000mm/H2O. The differences are the |
level of moisture permeability, the color, and the thickness. Select DINTEX |
membrane from our brochure depending on your demends of the MVT level. |
| |
|
| |
|
|
| |
On your brochure, there are only moisture permeability values in ASTM and |
JIS method. Are there any moisture permeability values in accordance to the |
European norms? |
| |
Yes, we have test values in accordance to DIN EN 31092 upon request. |
| |
|
Back to the top |
|
Are the membranes resistant to autoclave sterilization at 132℃? |
| |
We have a new special product which may work. It is not listed here, however, |
samples can be provided upon request. |
| |
|
Back to the top |
|
Can you make membranes in 2M width? |
| |
Yes, our maximum width for DINTEX membranes is 2.5M(2500mm). |
| |
|
Back to the top |
|
